Angular Contact Ball Bearing High Speed Series D 70-130mm

Short Description:


WELCOME TO DEMY BEARING,WELCOME TO VISIT OUR FACTORY


Product Detail

Product Tags

Boundary dimensions
(mm)
Basic load rating
(KN)
Limiting speed (r/min) Bearing Numbers Load centre
mm
Load ratings
(combined)
(kN)
Bearing Numbers Limiting speed
(combined)
Abutment and fillet dimensions(mm) Weight
single row
(reference)
(kg)
d D B r1,2
min
r3,4
min
Cr Cor Grease Oil Cr Cor Back to back arrangement
DB
Face to face arrangement
DF
Tandem arrangement
DT(r/min)
Grease Oil da
min
Da
max
Db
max
ra
max
rb
max
70 110 20 1.1 0.60 49.90 45.50 12000 19000 7014CTA 22.0 81.10 91.00 7014CTA/DB 7014CTA/DF 7014CTA/DT 9600 15000 77.0 103.0 106.0 1.0 0.60 0.598
70 110 20 1.1 0.60 47.30 43.30 10000 17000 7014ACTA 31.0 76.80 86.60 7014ACTA/DB 7014ACTA/DF 7014ACTA/DT 8000 13000 77.0 103.0 106.0 1.0 0.60 0.598
70 125 24 1.5 0.60 69.40 58.40 11000 18000 7214CTA 25.0 113.00 117.00 7214CTA/DB 7214CTA/DF 7214CTA/DT 8800 14000 79.0 116.0 120.0 1.5 0.60 1.110
70 125 24 1.5 0.60 66.00 55.70 9500 16000 7214ACTA 35.0 107.00 111.00 7214ACTA/DB 7214ACTA/DF 7214ACTA/DT 7600 12500 79.0 116.0 120.0 1.5 0.60 1.110
75 95 10 0.6 0.30 14.80 16.70 12500 20000 71815CTA 16.5 24.00 33.40 71815CTA/DB 71815CTA/DF 71815CTA/DT 10000 16000 80.0 90.0 92.5 0.6 0.30 0.138
75 95 10 0.6 0.30 14.20 15.70 10500 18000 71815ACTA 25.0 23.10 31.40 71815ACTA/DB 71815ACTA/DF 71815ACTA/DT 8400 14000 80.0 90.0 92.5 0.6 0.30 0.138
75 105 16 1.0 0.30 29.40 30.30 12000 19000 71915CTA 20.0 47.80 60.60 71915CTA/DB 71915CTA/DF 71915CTA/DT 9600 15000 81.0 99.0 103.0 1.0 0.30 0.356
75 105 16 1.0 0.30 27.70 28.60 10000 17000 71915ACTA 29.0 45.00 57.20 71915ACTA/DB 71915ACTA/DF 71915ACTA/DT 8000 13000 81.0 99.0 103.0 1.0 0.30 0.356
75 115 20 1.1 0.60 50.80 48.40 11000 18000 7015CTA 23.0 82.50 96.80 7015CTA/DB 7015CTA/DF 7015CTA/DT 8800 14000 82.0 108.0 111.0 1.0 0.60 0.632
75 115 20 1.1 0.60 48.40 46.00 9500 16000 7015ACTA 32.0 78.60 92.00 7015ACTA/DB 7015ACTA/DF 7015ACTA/DT 7600 12500 82.0 108.0 111.0 1.0 0.60 0.632
75 130 25 1.5 0.60 75.90 64.40 10000 17000 7215CTA 26.0 123.00 129.00 7215CTA/DB 7215CTA/DF 7215CTA/DT 8000 13000 84.0 121.0 125.0 1.5 0.60 1.190
75 130 25 1.5 0.60 72.00 61.50 9000 15000 7215ACTA 37.0 117.00 123.00 7215ACTA/DB 7215ACTA/DF 7215ACTA/DT 7200 12000 84.0 121.0 125.0 1.5 0.60 1.190
80 100 10 0.6 0.30 15.10 17.60 11500 18000 71816CTA 17.0 24.50 35.20 71816CTA/DB 71816CTA/DF 71816CTA/DT 9200 14000 85.0 95.0 97.5 0.6 0.30 0.146
80 100 10 0.6 0.30 14.40 16.50 11000 16500 71816ACTA 26.0 23.40 33.00 71816ACTA/DB 71816ACTA/DF 71816ACTA/DT 8800 13200 85.0 95.0 97.5 0.6 0.30 0.146
80 110 16 1.0 0.30 30.60 32.80 11000 18000 71916CTA 21.0 49.70 65.60 71916CTA/DB 71916CTA/DF 71916CTA/DT 8800 14000 86.0 104.0 108.0 1.0 0.30 0.376
80 110 16 1.0 0.30 28.70 30.40 9500 16000 71916ACTA 30.0 46.60 60.80 71916ACTA/DB 71916ACTA/DF 71916ACTA/DT 7600 12500 86.0 104.0 108.0 1.0 0.30 0.376
80 125 22 1.1 0.60 53.80 52.00 10000 17000 7016CTA 25.0 87.40 104.00 7016CTA/DB 7016CTA/DF 7016CTA/DT 8000 13000 87.0 118.0 121.0 1.0 0.60 0.860
80 125 22 1.1 0.60 51.50 49.30 9000 15000 7016ACTA 35.0 83.70 98.60 7016ACTA/DB 7016ACTA/DF 7016ACTA/DT 7200 12000 87.0 118.0 121.0 1.0 0.60 0.860
80 140 26 2.0 1.00 89.60 76.90 9500 16000 7216CTA 28.0 146.00 154.00 7216CTA/DB 7216CTA/DF 7216CTA/DT 7600 12500 90.0 130.0 134.0 2.0 1.00 1.450
80 140 26 2.0 1.00 85.00 73.60 8500 14000 7216ACTA 39.0 138.00 147.00 7216ACTA/DB 7216ACTA/DF 7216ACTA/DT 6800 11000 90.0 130.0 134.0 2.0 1.00 1.450
85 110 13 1.0 0.60 22.10 24.70 10500 17000 71817CTA 19.5 35.90 49.40 71817CTA/DB 71817CTA/DF 71817CTA/DT 8400 13000 91.0 104.0 106.5 1.0 0.50 0.257
85 110 13 1.0 0.60 21.10 23.20 9500 16000 71817ACTA 29.0 34.30 46.40 71817ACTA/DB 71817ACTA/DF 71817ACTA/DT 7600 12500 91.0 104.0 106.5 1.0 0.50 0.257
85 120 18 1.1 0.60 39.90 42.20 10000 17000 71917CTA 23.0 64.80 84.40 71917CTA/DB 71917CTA/DF 71917CTA/DT 8000 13000 92.0 113.0 115.0 1.0 0.60 0.532
85 120 18 1.1 0.60 37.70 39.80 9000 15000 71917ACTA 33.0 61.20 79.60 71917ACTA/DB 71917ACTA/DF 71917ACTA/DT 7200 12000 92.0 113.0 115.0 1.0 0.60 0.532
  • Previous:
  • Next:
  • Related Products

    Inquiry For Pricelist

    Contact Us

    Latest News

    • 09-01-2022
      In the early form of linear motion bearing, a row of wooden rods were placed under a row of skid plates. Modern linear motion bearings use the same working principle, except that sometimes balls are used instead of ro...
    • 10-24-2020
      Under normal circumstances, bearings installed with tight fit interference must be close to the shaft shoulder.Bearing inspection and shaft tightness method: 1. Light method, that is, aiming the light at the bearing (...
    • 09-18-2020
      1. Self-aligning ball bearing Spherical roller bearings are equipped with drum roller bearings between the inner ring with two raceways and the spherical outer ring. The curvature center of the outer ring raceway surf...
    Boundary dimensions
    (mm)
    Basic load rating
    (KN)
    Limiting speed (r/min) Bearing Numbers Load centre
    mm
    Load ratings
    (combined)
    (kN)
    Bearing Numbers Limiting speed
    (combined)
    Abutment and fillet dimensions(mm) Weight
    single row
    (reference)
    (kg)
    d D B r1,2
    min
    r3,4
    min
    Cr Cor Grease Oil Cr Cor Back to back arrangement
    DB
    Face to face arrangement
    DF
    Tandem arrangement
    DT(r/min)
    Grease Oil da
    min
    Da
    max
    Db
    max
    ra
    max
    rb
    max
    85 130 22 1.1 0.60 60.10 58.60 9500 16000 7017CTA 26.0 97.60 117.00 7017CTA/DB 7017CTA/DF 7017CTA/DT 7600 12500 92.0 123.0 126.0 1.0 0.60 0.890
    85 130 22 1.1 0.60 56.90 55.50 8500 14000 7017ACTA 36.0 92.40 111.00 7017ACTA/DB 7017ACTA/DF 7017ACTA/DT 6800 11000 92.0 123.0 126.0 1.0 0.60 0.890
    85 150 28 2.0 1.00 96.50 84.10 9000 15000 7217CTA 30.0 158.00 168.00 7217CTA/DB 7217CTA/DF 7217CTA/DT 7200 12000 95.0 140.0 144.0 2.0 1.00 1.840
    85 150 28 2.0 1.00 93.00 80.30 8000 13000 7217ACTA 42.0 151.00 161.00 7217ACTA/DB 7217ACTA/DF 7217ACTA/DT 7200 10000 95.0 140.0 144.0 2.0 1.00 1.840
    90 115 13 1.0 0.60 22.70 26.10 9900 17000 71818CTA 20.0 36.90 52.20 71818CTA/DB 71818CTA/DF 71818CTA/DT 7900 13000 96.0 109.0 111.5 1.0 0.50 0.270
    90 115 13 1.0 0.60 21.70 24.50 8900 15000 71818ACTA 30.5 35.30 49.00 71818ACTA/DB 71818ACTA/DF 71818ACTA/DT 7100 12000 96.0 109.0 111.5 1.0 0.50 0.270
    90 125 18 1.1 0.60 40.70 44.00 9500 16000 71918CTA 23.0 66.10 88.00 71918CTA/DB 71918CTA/DF 71918CTA/DT 7600 12500 97.0 118.0 120.0 1.0 0.60 0.555
    90 125 18 1.1 0.60 38.90 41.30 8500 14000 71918ACTA 34.0 63.20 82.60 71918ACTA/DB 71918ACTA/DF 71918ACTA/DT 6800 11000 97.0 118.0 120.0 1.0 0.60 0.555
    90 140 24 1.5 0.60 66.60 65.80 9000 15000 7018CTA 28.0 108.00 131.00 7018CTA/DB 7018CTA/DF 7018CTA/DT 7200 12000 99.0 131.0 135.0 1.5 0.60 1.170
    90 140 24 1.5 0.60 62.90 62.30 8000 13000 7018ACTA 39.0 102.00 125.00 7018ACTA/DB 7018ACTA/DF 7018ACTA/DT 6400 10000 99.0 131.0 135.0 1.5 0.60 1.170
    90 160 30 2.0 1.00 122.00 105.00 8500 14000 7218CTA 32.0 198.00 210.00 7218CTA/DB 7218CTA/DF 7218CTA/DT 6800 11000 100.0 150.0 154.0 2.0 1.00 2.230
    90 160 30 2.0 1.00 117.00 102.00 7500 12000 7218ACTA 44.0 190.00 204.00 7218ACTA/DB 7218ACTA/DF 7218ACTA/DT 6000 9600 100.0 150.0 154.0 2.0 1.00 2.230
    95 120 13 1.0 0.60 23.40 27.60 9300 15300 71819CTA 21.0 38.00 55.20 71819CTA/DB 71819CTA/DF 71819CTA/DT 7400 12200 101.0 114.0 116.5 1.0 0.50 0.283
    95 120 13 1.0 0.60 22.40 25.90 8800 14300 71819ACTA 32.0 36.40 51.80 71819ACTA/DB 71819ACTA/DF 71819ACTA/DT 7000 11400 101.0 114.0 116.5 1.0 0.50 0.283
    95 130 18 1.1 0.60 41.20 45.80 9000 15000 71919CTA 24.0 66.90 91.60 71919CTA/DB 71919CTA/DF 71919CTA/DT 7200 12000 102.0 123.0 125.0 1.0 0.60 0.580
    95 130 18 1.1 0.60 39.00 42.60 8500 14000 71919ACTA 35.0 63.40 85.20 71919ACTA/DB 71919ACTA/DF 71919ACTA/DT 6800 11000 102.0 123.0 125.0 1.0 0.60 0.580
    95 145 24 1.5 0.60 74.10 72.90 8500 14000 7019CTA 28.0 120.00 145.00 7019CTA/DB 7019CTA/DF 7019CTA/DT 6800 11000 104.0 136.0 140.0 1.5 0.60 1.200
    95 145 24 1.5 0.60 70.90 69.30 8000 13000 7019ACTA 40.0 115.00 139.00 7019ACTA/DB 7019ACTA/DF 7019ACTA/DT 6400 10000 104.0 136.0 140.0 1.5 0.60 1.200
    95 170 32 2.1 1.10 138.00 124.00 8000 13000 7219CTA 34.0 224.00 248.00 7219CTA/DB 7219CTA/DF 7219CTA/DT 6400 10000 107.0 158.0 163.0 2.0 1.00 2.700
    95 170 32 2.1 1.10 133.00 114.00 7500 12000 7219ACTA 47.0 216.00 228.00 7219ACTA/DB 7219ACTA/DF 7219ACTA/DT 6000 9600 107.0 158.0 163.0 2.0 1.00 2.700
    100 125 13 1.0 0.60 23.50 28.30 8800 14500 71820CTA 21.5 38.20 56.60 71820CTA/DB 71820CTA/DF 71820CTA/DT 7000 11600 106.0 119.0 121.5 1.0 0.50 0.296